Спецификация эопа XD-4

The introduction of the XD-4™ technology set the new European standard for low-light-level imaging.

XD-4™ Image Intensifiers perform extremely well in all environmental conditions. Its broad spectral sensitivity range results in a perfect picture. New production technology resulted in improved performance of the Signal-to-Noise Ratio (SNR), the Modulation Transfer Function (MTF) and Resolution. Add to this features like the small halo and the extended lifetime and you will be convinced of its unique performance.

The XD-4™ is also available with an autogating power supply unit.

XD-4™ Specifications

Resolution Minimal Typical Maximal UNIT
Limiting resolution 57 64   lp/mm
MTF (Modulation Transfer Function) Minimal Typical Maximal UNIT
2.5 lp/mm   92   %
7.5 lp/mm   80   %
15 lp/mm   58   %
25 lp/mm   45   %
30 lp/mm   35   %
Signal to Noise Ratio Minimal Typical Maximal UNIT
Signal to noise (@108µlx) 20 23    
Other Technical Data Minimal Typical Maximal UNIT
Phosphor: P20 (also available in P22 and P43)        
MTTF 15.000     hrs
HALO   0.8   mm 
Gain at 2.10 -5 lx 30.000/ pi   55.000/ pi cd/m 2/lx
Max. Output Brightness 2   17 cd/m 2
E.B.I.   0.15 0.25 µlx
Luminous sensitivity at 2850K 600 700   µA/lm
Radiant sensitivity at 800nm 50 60   mA/W
Radiant sensitivity at 850nm 40 50   mA/W
Output uniformity at 2850K   2:1 3:1  
Weight (18mm)   80 95 grams
Shock resistance 500    
Autogating Power Supply Unit (OPTIONAL)        
Input voltage 2   3.7 Volt
Input current (with Autogating)     35 mA
Luminance dynamic range 1.10^-6   5.10^3 Lux